Eclipse Kit

  • Can I add more Eclipse LED strips in addition to the strips that come with the kit?

    •The power supply wattage is 15W and the length of lights that can be added should only be within that capacity. | | | | | --- | --- | --- | | Lights | Minimum (ft) | Maximum (ft) | | Eclipse kit lights/ Luma 10 RGB SD | 3 ft (strips) | 7 ft (strips) | •Less than 3 feet would cause the light...

  • Can I install LED light strips in my car or vehicle?

    Yes, we offer LED light strips specifically designed for automotive use. These strips are flexible, waterproof, and adhesive-backed, making them easy to install in various locations inside or outside your vehicle for added style and visibility.

  • Can I sync 1 remote with multiple receivers? Or multiple remotes with 1 receiver?

    •For the 21 key remote included in the Eclipse Kit To pair the new receiver with the second light strip, let us call your Two Eclipse kit Set A and Set B. Please try the below steps, you can also check out the attached video for visual guidance. Disconnect the Receiver B from the power source. ...

  • Can I use LED light strips as primary lighting in a room?

    While LED light strips are primarily used as accent or mood lighting, they can also be used as primary lighting in certain applications. However, it's important to consider factors such as brightness, color temperature, and coverage to ensure adequate illumination for the space.

  • Can the Eclipse Kit be controlled by via app?

    •Eclipse kit does not come with an app/wifi controller •HitLights does not also sell app controllers separate from the existing kits•Customer can choose to purchase a third party controller but not guaranteed if they will be compatible with the eclipse kit

  • Do you sell more pre cut lights?

    •We currently do not have the pre-cut strips sold separately, and these are only available in the kit. •Luma 10 RGB is available but they come in a white-colored strip. •When using Luma 10, strip to pin connector is needed to connect both light strips

  • How do I use the remote?

    •Follow the details from the manual. •Most customers are unaware of what the M and S buttons are for. •Indicate that the Mode + and – is to move forward and backward to different effects

  • How to change the RGB receiver?

    If changing the receiver with a 44key remote: •Remove the previous receiver•Remove the 4pins and attach the new receiver to the LED strip.•Connect the power source in the area encircled blue

  • How to install my Eclipse Kit

    •Attach the power supply -> receiver -> lights -> connector -> lights •Attach the 4 pins in between the connectors and the lights by inserting them gently •Make sure the arrows are aligned when connecting•Peel the tape at the back of the lights to mount them in the desired location ...